NASA SBIR 2021-I Solicitation

Proposal Summary


   
Proposal Number:          21-1- S1.09-2769
          
          
   
Subtopic Title:
      Cryogenic Systems for Sensors and Detectors
          
          
   
Proposal Title:
      High temperature superconducting magnet operating above 15 K for ADR cooling
          
          

Small Business Concern

   
Firm:
          
Solid Material Solutions, LLC
          
   
Address:
          
55 Middlesex Street, Suite 205, North Chelmsford, MA 01863
          
   
Phone:
          
(978) 455-7182                                                                                                                                                                                
          

Principal Investigator:

   
Name:
          
Alexander Otto
          
   
E-mail:
          
alexanderotto@comcast.net
          
   
Address:
          
55 Middlesex St., Suite 205, MA 01863 - 1561
          
   
Phone:
          
(978) 808-9016                                                                                                                                                                                
          

Business Official:

   
Name:
          
Alexander Otto
          
   
E-mail:
          
alexanderotto@comcast.net
          
   
Address:
          
55 Middlesex St., Suite 205, MA 01863 - 1561
          
   
Phone:
          
(978) 808-9016                                                                                                                                                                                
          

Summary Details:

   
Estimated Technology Readiness Level (TRL) :                                                                                                                                                          
Begin: 1
End: 4
          
          
     
Technical Abstract (Limit 2000 characters, approximately 200 words):

This Phase I program will develop a coil design and deliver a prototype that proves the feasibilty of exceeding the requirements set forth in topic area S.109 for Sub-Kelvin Cooling ADR (Adiabatic Demagnetization Refrigeration) Coils. It will utilize a new type of small diameter wire based on the Bi2212 high temperature superconductor (HTS), that has recently been developed to wind the ac stator coils of compact, lightweight motors for hybrid electric airplane propulsion. These wire types with < 0.16 mm diameters now exhibit 3 times higher current density than standard wires and they are in forms that are applicable to ADR magnets. For ADR usage, this wire design will be applied in long insulated lengths to wind coils with the capability to operate at the specified higher operating temperatures, small winding currents, high current densities and with low losses in ramped fields. This wire type is also applicable to Actuators and Other Cryogenic Devices that are described in this topic area. As a first step in Phase I, the capability to produce long lengths of a specific small cross-sectioned 2212 wire design for ADR will be established based on current wire capability, and a demonstration test coil built. The wire design will include axial twisting and unmerged filaments for reducing ramped field loss, thin insulation, and current densities to meet specifications for up to 20K operation at 4T field, as requested for next level ADR coil advances. Coil fabrication techniques will be established, both with the Bi2212 ceramic in its high Jc, reacted form during windings well as in a pre-reacted form.  A short length, full radial build coil deliverable will be built, tested and provided to NASA for evaluation and validation, attaining a TRL of 4 upon completion. In Phase II a full scale coil system will be developed and delivered.

          
          
     
Potential NASA Applications (Limit 1500 characters, approximately 150 words):

A new type of 2212-based superconducting coil that will operate in the 15 K to 20 K temperature range for its utilization in next generation ADR magnet systems sought by NASA for some space-based instruments, as compared to the present 10 K range, and exceeding the requested > 15 K specified. 

Additional potential applications at NASA include: i) Space based magneto-strictive actuators and valves ii) Specialty small sized light weight, high power density motors for example for pumping liquid cryogens iii) Magnetic shielding.

          
          
     
Potential Non-NASA Applications (Limit 1500 characters, approximately 150 words):

Summary: i) Small hand-held magnets to replace permanent magnets, thereby enabling field level adjustment and turning off the magnet for medical applications, ii) Specialty, very low loss cables produced by cabling, for ac and ramped field magnets in motors, generators, and ultimately, transformers, iii) specialty actuators

 

          
          
     
Duration:     6
          
          

Form Generated on 04/06/2021 12:21:18