NASA SBIR 2019-I Solicitation

Proposal Summary

 19-1- Z11.01-3602
 NDE Sensors, Modeling, and Analysis
 Damage Detection Using Two-Stage Compressive Sensing
SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Advent Innovations Limited
612 Dutchmans Creek Trail
IRMO, SC 29063- 8331
(480) 234-5267

Principal Investigator (Name, E-mail, Mail Address, City/State/Zip, Phone)

Dr. Shawn Beard
612 Dutchmans Creek Trail, Irmo, South Carolina-29063 IRMO, SC 29063 - 8331
(408) 230-0502

Business Official (Name, E-mail, Mail Address, City/State/Zip, Phone)

Ritubarna Banerjee PhD
612 Dutchmans Creek Trail, Irmo, South Carolina-29063 IRMO, SC 29063 - 8331
(480) 234-5267
Estimated Technology Readiness Level (TRL) :
Begin: 2
End: 4
Technical Abstract (Limit 2000 characters, approximately 200 words)

NASA is developing new vehicles for human space flight. The Orion crew module is a reusable capsule that provides a habitat for the crew and facilitates exploration of the Moon, asteroids, and Mars. The Space Launch System (SLS) is a heavy lift system and is part of NASA’s deep space exploration plans. The SLS will carry humans beyond low Earth orbit and will deliver elements of the Lunar Orbital Platform-Gateway. Many of these spacecraft are targeted for long-term use, which offers challenges for inspection and maintenance. In orbit or on the Moon, the use of traditional NDE is prohibitive because of location and inaccessibility, and infrequent inspection can lead to conservative, high-weight designs. NASA is seeking technologies to facilitate inspections on large complex structures and provide reliable assessments of structural health.


Structural health monitoring (SHM) can help overcome inspection difficulties and has shown good results on small structures. However, transition to large complex structures has been slow. Some reasons for the slow adoption are difficulties with large sensor arrays, timely analysis of large data sets, and overall weight of the system. In order to realize the benefits of SHM, there’s a need to reduce the number of sensors and minimize data acquisition processes while maintaining the ability to accurately detect, locate, and characterize damage.


Compressive Sensing (CS) has been shown to greatly reduce data acquisition and processing burdens by providing mathematical guarantees for accurate signal recovery from far fewer samples than conventionally needed. In this project, it is proposed to develop an ultrasound software package to detect damage in large complex structures using CS at two stages in the data acquisition and analysis process: (1) temporally undersampled sensor signals from (2) spatially undersampled sensor arrays, resulting in faster data acquisition and reduced data sets without any loss in damage detection ability.


Potential NASA Applications (Limit 1500 characters, approximately 150 words)

The technology will add to NASA’s inspection tools for large complex structures made with composites or thin metals, such as the Orion crew module, Space Launch System, and the Lunar Outpost Platform-Gateway. As NASA continues to push into deep space, SHM systems will be needed to provide mission critical information on the structure’s status. In order for these SHM systems to be viable, the total number of sensors, total weight, and data acquisition requirements must be minimized, and the proposed technology will be critical in achieving this.

Potential Non-NASA Applications (Limit 1500 characters, approximately 150 words)

Non-NASA applications include large, commercial space launch vehicles. Other industries/applications include aerospace (aircraft wings and fuselage), marine (ship hulls), wind energy (rotor blades), railways, civil infrastructure (buildings and bridges), oil and gas (pipelines). Generally, any industry that uses large structures that require frequent inspection will benefit from the technology.

Duration: 6

Form Generated on 06/16/2019 23:13:03