NASA SBIR 2018-II Solicitation

Proposal Summary

 18-2- S1.03-5363
 Technologies for Passive Microwave Remote Sensing
 Low-Loss Millimeter-Wave Isolators for Cryogenic Systems
SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Micro Harmonics Corporation
20 South Roanoke Street, Suite 202
Fincastle, VA 24090
(540) 473-9983

PRINCIPAL INVESTIGATOR (Name, E-mail, Mail Address, City/State/Zip, Phone)
David Porterfield
20 South Roanoke Street, Suite 202
Fincastle, VA 24090 - 3102
(434) 409-4044

BUSINESS OFFICIAL (Name, E-mail, Mail Address, City/State/Zip, Phone)
Diane Kees
20 South Roanoke Street, Suite 202
Fincastle, VA 24090 - 3102
(540) 473-9983

Estimated Technology Readiness Level (TRL) :
Begin: 5
End: 6
Technical Abstract (Limit 2000 characters, approximately 200 words)

The primary objective of the proposed SBIR Phase II research is to extend the room temperature millimeter-wave (MMW) technology developed by Micro Harmonics to isolators operating at cryogenic temperatures. Two very successful cryogenic prototype devices at WR-10 (75-110 GHz) were designed in the Phase I effort. The measured insertion loss at 77 K is 0.3 dB and the isolation is greater than 25 dB across the band. In the Phase II program we propose to develop a line of cryogenic isolators optimized for cryogenic temperatures operating in every waveguide band from WR-15 through WR-5.1 and to deliver prototype devices at each band to NASA. We will also design cryogenic isolators for the WR-4.3 and WR-3.4 bands. These components will fill an unmet need and find immediate application in many cryogenic systems now being developed for NASA missions.

Cryogenic cycling puts mechanical stresses on the constituent parts of the isolators that can ultimately lead to premature failure. Part of the proposed research is to identify and mitigate potential failure mechanisms so that the isolators can reliably withstand multiple cryogenic cycles over the lifetime of the device. This task is accomplished through sophisticated thermal stress modeling as well as repeated cryogenic cycling of the isolator assemblies.

A WR-2.8 (260-400 GHz) isolator designed in the Phase I will be assembled and tested. This isolator will be the first of its kind at this frequency. A novel line of MMW voltage variable attenuators (VVA) will also be developed. The VVA’s utilize the Faraday rotation effect in a similar way as the isolators, but with a variable magnetic bias field instead of a fixed saturated magnetic field. Initial investigations indicate that the effective attenuation range should be at least 1-35 dB in the WR-10 band. NASA researchers at JPL have expressed their interest in these devices.

Potential NASA Applications (Limit 1500 characters, approximately 150 words)

NASA develops many sensitive cryogenic detection systems including millimeter-wave and terahertz sources, detectors and receivers for NASA’s Submillimeter Missions such as Marvel, VESPER, MACO and SIRICE. There are potential applications in the local oscillator chains in the high-resolution heterodyne array receivers at 1.9 THz being developed to support SOFIA and the Stratospheric Terahertz Observatory (STO-2) as well as the 4.7 THz multiplied local oscillator source for the observation of neutral oxygen.

Potential Non-NASA Applications (Limit 1500 characters, approximately 150 words)

The international radio astronomy community develops a large number of cryogenic systems. This includes the National Radio Astronomy Observatory in the US. Cryogenic systems are used when the absolute highest sensitivity is required. They are used predominantly in scientific applications including spectroscopy and biomaterial analysis but also find use in military and commercial applications.

Duration: 24

Form Generated on 05/13/2019 13:32:38