NASA SBIR 2018-II Solicitation

Proposal Summary

 18-2- H7.01-9532
 Development of Higher Strength Feedstocks for In-Space Manufacturing
 Development of Fiber Reinforced Composite Feedstock for In-Space Manufacturing of High Strength Parts
SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
GeoComposites, LLC
111 Veterans Memorial Boulevard, Suite 1600
Metairie, LA 70005
(504) 405-3386

PRINCIPAL INVESTIGATOR (Name, E-mail, Mail Address, City/State/Zip, Phone)
Dr. Sunil Patankar
111 Veterans Memorial Blvd., Suite 1600
Metairie, LA 70005 - 3044
(256) 489-4748

BUSINESS OFFICIAL (Name, E-mail, Mail Address, City/State/Zip, Phone)
Amy Trosclair
111 Veterans Memorial Blvd., Suite 1600
Metairie, LA 70005 - 3044
(504) 405-3386

Estimated Technology Readiness Level (TRL) :
Begin: 3
End: 6
Technical Abstract (Limit 2000 characters, approximately 200 words)

The Phase I results have demonstrated the feasibility of using FDM, optimized feedstock combinations, and composite architecture to produce high strength parts. During Phase II, this initial success will be expanded on for this overall technology to become a feasible candidate for ISS accommodation. Accordingly, during Phase II the FDM unit will be modified to meet ISS compatibility standards and a prototype of this unit will be developed. In addition, the composite architecture, fiber layup, and feedstock combinations down selected from Phase I will be further optimized to improve structural capability beyond what was already achieved during the Phase I effort. Advanced feedstocks will be further developed not only for enhancement of structural properties but also from the perspective of outgassing. The team recognizes that for a true structural part built on the ISS, it may not be possible to conduct comprehensive mechanical testing on ISS to validate the part itself. During Phase II, a comprehensive finite element modeling (FEA) approach will be undertaken to predict mechanical properties as a function of feedstock combination and composite configuration. This FEA model will be validated using extensive mechanical and fracture testing data. Such a validated model will be a useful tool to select feedstocks and composite architecture combinations prior to printing a part on the ISS. Sufficient testing of down selected feedstock combinations and composites will be conducted to develop at least an S basis design allowable. We also propose to pursue FDM printing of metallic parts and demonstrate the potential of using the same FDM unit to print both composite and metallic parts. Development of such a versatile FDM unit will be a significant contribution to enhance ISS or NASA’s FabLab capabilities by reducing the launch payload mass and reducing the footprint.


Potential NASA Applications (Limit 1500 characters, approximately 150 words)

Direct NASA applications include in-space and on demand manufacturing of critical components. It could directly support the requirements of NASA’s FabLab efforts. FDM technology and feedstocks can be used for multifunctional composite structural radiation shields for the protection of humans and electronics during deep space missions and structural components for space transportation vehicles. Potential NASA contractors include SpaceX, Boeing, Orbital-ATK, Lockheed, Bigelow Aerospace, etc.

Potential Non-NASA Applications (Limit 1500 characters, approximately 150 words)

- Department of Defense: on-demand printed parts in theater of operation.

- Automotive Industry: lightweight printed composites to enhance fuel efficiency.

- Aerospace Industry: commercial fuselage and jet engine nozzle.

- Construction Industry: fiber reinforced material feedstock for Contour Crafting

- Medical Industry: products ranging from medical devices to cell culturing.-

Duration: 24

Form Generated on 05/13/2019 13:32:15