NASA SBIR 2018-I Solicitation

Proposal Summary


PROPOSAL NUMBER:
 18-1- S4.02-9662
SUBTOPIC TITLE:
 Robotic Mobility, Manipulation and Sampling
PROPOSAL TITLE:
 Dust Tolerant Electropermanent Magnetic Tool Interface
SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Altius Space Machines, Inc.
3001 Industrial Lane, Unit #5
Broomfield , CO 80020-7153
(801) 362-2310

Principal Investigator (Name, E-mail, Mail Address, City/State/Zip, Phone)
Joshua Nelson
nelsonj@altius-space.com
1076 S Johnson St Lakewood, CO 80226 - 4073
(303) 913-4387

Business Official (Name, E-mail, Mail Address, City/State/Zip, Phone)
Jonathan Goff
jongoff@altius-space.com
3001 Industrial Lane, Unit #5 Broomfield, CO 80020 - 7153
(801) 362-2310
Estimated Technology Readiness Level (TRL) :
Begin: 2
End: 4
Technical Abstract

For many years industrial robots have benefited from the availability of automatic tool changers, allowing one robot to perform a much wider range of tasks than could be performed otherwise. While space robots for satellite servicing have embraced the use of robotic tool changers, planetary science robotics systems have historically avoided the use of tool changers, because traditional tool changers use complex mechanical latching mechanisms with many exposed moving parts, which are often mechanically unreliable in dusty environments. To solve these problems, and enable planetary science missions to switch from using massive, complex, and bulky multi-tool turret designs, Altius proposes the development of an Electropermanent Magnetic Tool Changer, which has no externally exposed moving parts. This proposed EPM Tool Changer concept uses a solid state switchable magnetic latching system to hold the tool to the tool changer, and non-contact power and data transmission. And while it is not in the scope of the proposed Phase I/II effort, this tool changer design can also enable the use of a contactless mechanical tool-drive coupling system, enabling mechanical tool drive without exposed moving parts on either side of the interface.

During Phase I, Altius will work with NASA planetary science robotics teams to identify and document system requirements, and then Altius will design, build, and prototype the magnetic connection system and the wireless power/data transfer systems. This testing, which will include preliminary dusty environment testing will raise the TRL of the power/data version of the EPM tool changer from TRL 2 to TRL 4, enabling a flight-grade prototype of the power/data EPM Tool Changer to be designed, built, and qualified during Phase II, raising the system to TRL 6, where it is mature enough to be integrated into future NASA and commercial missions.

 

 

Potential NASA Applications
Potential Non-NASA Applications

Form Generated on 05/25/2018 11:45:18