NASA SBIR 2018-I Solicitation

Proposal Summary


PROPOSAL NUMBER:
 18-1- H9.01-8113
SUBTOPIC TITLE:
 Long Range Optical Telecommunications
PROPOSAL TITLE:
 Ultra-Lightweight, Ultra-Stable RoboSiC Additively Manufactured Lasercom Telescope
SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Goodman Technologies, LLC
9551 Giddings Avenue Northeast
Albuquerque , NM 87109-6412
(505) 400-8169

Principal Investigator (Name, E-mail, Mail Address, City/State/Zip, Phone)
Dr. William Goodman
bgoodman@goodmantechnologies.com
9551 Giddings Ave NE ALBUQUERQUE, NM 87109 - 6412
(505) 400-8169

Business Official (Name, E-mail, Mail Address, City/State/Zip, Phone)
Dr. William Goodman
bgoodman@goodmantechnologies.com
9551 Giddings Ave NE ALBUQUERQUE, NM 87109 - 6412
(505) 400-8169
Estimated Technology Readiness Level (TRL) :
Begin: 3
End: 4
Technical Abstract

Of interest to JPL, GRC and GSFC are laser communications telescopes (LCTs) with 30 to 100 cm clear aperture, wavefront error (WFE) less than 62 nm, cumulative WFE and transmission loss not to exceed 3-dB in the far field, advanced thermal and stray light design for operation while sun-pointing (3-degrees from the edge of the sun); -20° C to 50° C operational range (wider range preferred), and areal density <65kg/m2.  Telescope dimensional stability, low scatter, extreme lightweighting, and precision structures are a common theme across the NASA 2017 Physics of the Cosmos and Cosmic Origins Program Annual Technology Reports.  Multiple Priority technology gaps can be found that require a solution in time for the next Decadal Survey. A common cited solution of interest is silicon carbide and 3D printing or additive manufacturing.  RoboSiC technologies provide both. Team GT proposes  purposefully engineered 2nd Generation optical-grade  and structural-grade “RoboSiC to provide the degree of passive athermality required for the laser communications telescope wavefront error stability, concomitant with low areal density mirrors (7.75-10 kg/m2) and structures (4-5 kg/m2), and the ability to perform active precision adjustment (if required). The combination of 3D/AM allows the possibility to manufacture high structural efficiency classical truss structures such as the Pratt, Warren and Howe trusses and our gradient lattice cores for the mirrors. Clever design provides the additional stability benefit of damping during slew.  We will use a combination of 3D/AM parts to produce inexpensive, bolt-together, athermal telescopes which achieve optical pathlength and wavefront error stability with low-scatter. A Paul-Baker three-mirror anastigmatic  telescope may be an ideal laser communications telescope design. We plan to deliver mirror and structures coupons to NASA for testing.

Potential NASA Applications

NASA requires lasercom telescopes for space missions in multiple domains: >100 gigabit/s cislunar (Earth or lunar orbit to ground), >10 gigabit/s Earth-sun L1 and L2, >1 gigabit/s per AU-squared deep space, and >100 megabit/s planetary lander to orbiter. Other NASA missions that can benefit from our technology include eLISA and future Gravity Wave Observatories, future FIR (Origins Space Telescope), LUVOIR and HabEx missions.

Potential Non-NASA Applications

Potential non-NASA applications include commercial free space communications, complex telescopes for Astronomy, Imaging and Remote Sensing applications, optical instruments/telescopes which enable imaging, surveillance, and reconnaissance missions for the military, police and paramilitary units, fire fighters, power and pipeline monitoring, search and rescue, atmospheric and ocean monitoring, and high-energy laser beam directors. 


Form Generated on 05/25/2018 11:31:16