NASA SBIR 2016 Solicitation


PROPOSAL NUMBER: 16-1 H14.01-8013
SUBTOPIC TITLE: International Space Station (ISS) Utilization
PROPOSAL TITLE: ERASMUS: Food Contact Safe Plastics Recycler and 3D Printer System

SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
Tethers Unlimited, Inc.
11711 North Creek Parkway South, Suite D113
Bothell, WA 98011 - 8808
(425) 486-0100

PRINCIPAL INVESTIGATOR/PROJECT MANAGER (Name, E-mail, Mail Address, City/State/Zip, Phone)
Dr. Rachel Muhlbauer
11711 North Creek Parkway South, Suite D113
Bothell, WA 98011 - 8804
(425) 486-0100

CORPORATE/BUSINESS OFFICIAL (Name, E-mail, Mail Address, City/State/Zip, Phone)
Dr. Robert P Hoyt
11711 North Creek Parkway South, Suite D113
Bothell, WA 98011 - 8804
(425) 486-0100 Extension :111

Estimated Technology Readiness Level (TRL) at beginning and end of contract:
Begin: 2
End: 4

Technology Available (TAV) Subtopics
International Space Station (ISS) Utilization is a Technology Available (TAV) subtopic that includes NASA Intellectual Property (IP). Do you plan to use the NASA IP under the award?

TECHNICAL ABSTRACT (Limit 2000 characters, approximately 200 words)
One of the goals of the Human Exploration and Operations Mission Directorate (HEOMD) from 2012 is to ´┐Żutilize the ISS for developing the systems and protocols necessary to humans to venture beyond low Earth orbit for extended durations´┐Ż, and with the push from Congress in 2015 to build a deep space habitat for a Mars mission by 2018, the goals of HEOMD are increasingly important to meet. ERASMUS will enable these goals by providing a technology suite which is both a trash recycling unit and a microbial sterilizer. The ERASMUS technology suite contains a plastics recycler, dry heat sterilizer, and 3D printer that accepts previously used utensils, trays, and food storage containers, sterilizes these pre-used materials, recycles them into food grade 3D printer filament, and fabricates food contact safe 3D printed parts. This effort intends to minimize the requirements for resupplying and/or storing excess wet wipes, utensils, food containers, and waste. It also intends to improve astronaut health and safety by providing utensils which are truly sterile and free of harmful contaminants for long duration missions. In the phase II effort, we will further enable the goals of HEOMD by expanding ERASMUS to provide a medical grade 3D printer.

POTENTIAL NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
The proposed ERASMUS technology will find use on the ISS and on any future long duration manned mission as a means to promote astronaut health and safety as well as lowering mission cost and trash generated by providing a means to create needed parts while in space. TUI anticipates that the expansion of ERASMUS into medical grade 3D printing in the Phase II effort will further the need for ERASMUS on the ISS, long duration missions, and on manned habitats.

POTENTIAL NON-NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
TUI expects that the advancements made to 3D printing in order to create food contact safe sterilized materials will be ideal for the DoD to support soldiers in remote locations where resupply is limited. We also anticipate this technology to be a game-changer for people with little access to water. In the Phase II, we plan to explore the possibility to extend the technology to medical grade 3D printing which will have an even more widespread impact across the globe and in space. Medical facilities will be able to print sterile implants and surgical tools on demand, rather than requiring storage or waiting for the delivery of these devices.

TECHNOLOGY TAXONOMY MAPPING (NASA's technology taxonomy has been developed by the SBIR-STTR program to disseminate awareness of proposed and awarded R/R&D in the agency. It is a listing of over 100 technologies, sorted into broad categories, of interest to NASA.)
Food (Preservation, Packaging, Preparation)
In Situ Manufacturing
Processing Methods

Form Generated on 04-26-16 15:14