NASA STTR 2014 Solicitation


PROPOSAL NUMBER: 14-2 T4.01-9879
RESEARCH SUBTOPIC TITLE: Dynamic Servoelastic (DSE) Network Control, Modeling, and Optimization
PROPOSAL TITLE: Dynamic ASE Modeling and Optimization of Aircraft with SpaRibs

NAME: M4 Engineering, Inc. NAME: Virginia Polytechnic Institute
STREET: 4020 Long Beach Boulevard STREET: 300 Turner Street Northwest
CITY: Long Beach CITY: Blacksburg
STATE/ZIP: CA  90807 - 2683 STATE/ZIP: VA  24061 - 0001
PHONE: (562) 981-7797 PHONE: (540) 231-4881

PRINCIPAL INVESTIGATOR/PROJECT MANAGER (Name, E-mail, Mail Address, City/State/Zip, Phone)
Myles Baker
4020 Long Beach Boulevard
Long Beach, CA 90807 - 2683
(562) 305-3391

CORPORATE/BUSINESS OFFICIAL (Name, E-mail, Mail Address, City/State/Zip, Phone)
Myles Baker
4020 Long Beach Boulevard
Long Beach, CA 90807 - 2683
(562) 305-3391

Estimated Technology Readiness Level (TRL) at beginning and end of contract:
Begin: 4
End: 5

Technology Available (TAV) Subtopics
Dynamic Servoelastic (DSE) Network Control, Modeling, and Optimization is a Technology Available (TAV) subtopic that includes NASA Intellectual Property (IP). Do you plan to use the NASA IP under the award?

TECHNICAL ABSTRACT (Limit 2000 characters, approximately 200 words)
In aircraft design, reducing structural weight is often a prime objective, while various constraints in multiple disciplines, such as structure, aerodynamics and aeroelasticity should be imposed on the aircraft. Therefore, engineers need optimization tools to incorporate the multidisciplinary constraints using appropriate fidelity during the early stages of concept design. Classic structural design of aircraft structures is based on the concept of a "wing box" that uses simple components such as straight spars and ribs, quadrilateral wing skin panels and straight stiffeners. A new design philosophy, using curvilinear SpaRibs has been introduced based on emerging manufacturing technologies such as Electron Beam Free Form Fabrication and Friction Stir Welding (FSW). In those innovative technologies, the wing structure is manufactured as an integrated part instead of using mechanically fastened structural components. This design approach makes it possible to design curved substructure that is a hybrid between spars and ribs, therefore called "SpaRibs". These can be designed to have favorable coupling between bending and torsion, and can improve the buckling resistance of local panels. The ability to tailor the bend-twist coupling has been shown to offer substantial improvement in aeroelastic behavior without a weight penalty (or alternately, a weight savings without aeroelastic problems). In this program we will advance this technology to a TRL of 5-6 (or to 6-7 in a Phase III) by designing a subsonic transport wing with better aeroelastic and aeroservoelastic performance, and by designing a test article and test program suitable for proving the performance benefits in flight.

POTENTIAL NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
This technology has the potential to improve the performance of aircraft in subsonic, transonic, and supersonic flight regimes, especially those vehicles whose performance is significantly impacted by aeroelastic phenomena such as flutter or unfavorable static aeroelastic interactions. As such, this could impact any NASA-sponsored aircraft program. The most immediate application would be to the X-56A program, but follow on applications are likely to include future technology demonstration aircraft such as low-boom demonstrators, HALE configurations, planetary exploration aircraft, etc.

POTENTIAL NON-NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
As with the NASA applications, this technology increases aircraft performance for multiple classes of aircraft, so this technology may be applied to aircraft including subsonic transports, UAV's, fighters, supersonic transports, bombers, military transports, and reconnaissance aircraft. A successful flight test program in Phase III could pave the way to widespread adoption of this technology (in whole or in part) by Boeing, Northrop-Grumman, Lockheed-Martin, and a host of smaller airframers.

TECHNOLOGY TAXONOMY MAPPING (NASA's technology taxonomy has been developed by the SBIR-STTR program to disseminate awareness of proposed and awarded R/R&D in the agency. It is a listing of over 100 technologies, sorted into broad categories, of interest to NASA.)
Models & Simulations (see also Testing & Evaluation)
Software Tools (Analysis, Design)
Vehicles (see also Autonomous Systems)

Form Generated on 04-07-15 13:59