NASA SBIR 2011 Solicitation

FORM B - PROPOSAL SUMMARY


PROPOSAL NUMBER: 11-2 S2.05-8333
PHASE 1 CONTRACT NUMBER: NNX12CF49P
SUBTOPIC TITLE: Optics Manufacturing and Metrology for Telescope Optical Surfaces
PROPOSAL TITLE: Optical Fabrication and Metrology of Aspheric and Freeform Mirrors

SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
OptiPro Systems LLC
6368 Dean Parkway
Ontario, NY 14519 - 8970
(585) 265-0160

PRINCIPAL INVESTIGATOR/PROJECT MANAGER (Name, E-mail, Mail Address, City/State/Zip, Phone)
David Mohring
dmohring@optipro.com
6368 Dean Parkway
Ontario, NY 14519 - 8970
(585) 265-0160

Estimated Technology Readiness Level (TRL) at beginning and end of contract:
Begin: 4
End: 6

TECHNICAL ABSTRACT (Limit 2000 characters, approximately 200 words)
The requirement for cost effective manufacturing and metrology of large optical surfaces is instrumental for the success of future NASA programs such as LISA, WFIRST and IXO(now NGXO). OptiPro's UltraForm Finishing (UFF) is a sub-aperture compliant wheel and belt type polishing process for rapid material removal from the ground state to a finished optic. The UFF removes residual grinding sub-surface damage, mid spatial frequency errors, and provides the mechanism required for surface corrections. OptiPro's technologically advanced optical manufacturing capabilities along with a support partnership with the University of Rochester Mechanical Engineering Department and the Penn State EOC, gives us a very strong team and a clear path towards solving the difficult problems associated with, grinding, polishing and metrology of large complex optical surfaces. The UFF, with its 5-6 axis of motion provides a platform to polish traditional flats and spheres as well as aspheres and freeform shapes. The UFF was designed for deep concave shapes and it is suitable for finishing conformal optics. The Proposed Phase II will include further development on UFF using a 200 mm x 200 mm fused quartz mandrel to optimize the process to meet NASA's X-ray optical requirements. Grinding development will also be performed on OptiPro's eSX platforms to minimize material removal required during polishing. The part geometry will be measured by a non contact optical probe using OptiPro's UltraSurf free-form measurement system. Once development is complete, OptiPro will work on the mandrels that will be supplied by Goddard Space Flight Center to attempt to correct the form error on those surfaces. OptiPro will also build and install a 6-axis UFF machine to NASA. The UFF platform will be used for development during the Phase II effort, and installed at NASA at the end of the contract.

POTENTIAL NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
UltraForm Finishing (UFF) is a CNC controlled process designed to remove grinding sub surface damage as well as mid spatial frequency errors for both relatively "soft" glasses as well as "hard" metals and ceramics for many applications. These applications may include the fabrication of
forming mandrels used to produce multiple segmented shell mirrors for the International X-Ray Observatory (IXO). The aspheric and freeform optical surfaces required by LISA and WFIRST will benefit from the fabrication advances made with this endeavor. By integrating finite element
analysis (FEA) tools with the UFF computer aided manufacturing (CAM) interface, we will be able to optimize the fabrication process and subsequently reduce and/or completely eliminate mid spatial
frequency errors. The UFF has the capability to work with a wide range of traditional optical mediums (i.e., combination of belt materials and loose abrasives) in addition to wheels that range from approximately 20 mm up to 150 mm. This makes the UFF suitable for polishing a wide variety of materials for other segmented types of telescope systems such as the Advanced Technology Large Aperture Space Telescope (ATLAST). The wide variety of loose and bound abrasives allows the UltraForm platform to finish hard ceramics, Silicon and SiC. With these hard to process materials,the UFF has shown promise for grinding as well as polishing optical surfaces, on a small scale.

POTENTIAL NON-NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
Since 1989 OptiPro has developed and refined conceptual technologies into robust deterministic machines and processes for the optical fabrication industry. Non-NASA commercial applications include the fabrication of flats, spheres, aspheres, and complex conformal shapes such as
aerodynamic ogive domes. Commercialization of these technologies has driven very cost effective solutions. The UFF polishing tools' ability to polish a variety of materials from the ground state, removing grinding marks and subsurface damage, makes it especially attractive for applications where mid-spatial-frequency surface errors are an issue such as EUV lithography. Another application is for laser amplifiers, such as the Inertial Confinement Fusion National Ignition Facility (NIF) at Lawrence Livermore National Laboratory and the Laboratory for Laser Energetics, at the University of Rochester. For these types of applications, laser damage threshold and irradiance distribution are critical and therefore mid-spatial frequency errors need to be minimized after the polishing stage.

TECHNOLOGY TAXONOMY MAPPING (NASA's technology taxonomy has been developed by the SBIR-STTR program to disseminate awareness of proposed and awarded R/R&D in the agency. It is a listing of over 100 technologies, sorted into broad categories, of interest to NASA.)
Adaptive Optics
Ceramics
Composites
In Situ Manufacturing
Lenses
Machines/Mechanical Subsystems
Metallics
Mirrors
Optical
Processing Methods


Form Generated on 11-06-12 18:12