NASA SBIR 2010 Solicitation


PROPOSAL NUMBER: 10-2 S1.04-8997
SUBTOPIC TITLE: Sensor and Detector Technology for Visible, IR, Far IR and Submillimeter
PROPOSAL TITLE: High Quantum Efficiency Type II SLS FPAs for Space-Based Applications

SMALL BUSINESS CONCERN (Firm Name, Mail Address, City/State/Zip, Phone)
IntelliEPI IR, Inc.
1250 East Collins Boulevard
Richardson, TX 75081 - 2401
(972) 234-0068

PRINCIPAL INVESTIGATOR/PROJECT MANAGER (Name, E-mail, Mail Address, City/State/Zip, Phone)
Paul Pinsukanjana
1250 East Collins Boulevard
Richardson, TX 75081 - 2401
(972) 814-6050

Estimated Technology Readiness Level (TRL) at beginning and end of contract:
Begin: 4
End: 5

TECHNICAL ABSTRACT (Limit 2000 characters, approximately 200 words)
This Phase II SBIR proposes to develop high quantum efficiency (QE) and low dark current infrared epitaxy materials based on Type II Strained Layer Superlattice (SLS) for space-based sensor applications. The epi materials will be grown with Sb-capable multi-wafer production Molecular Beam Epitaxy (MBE) reactor at IntelliEPI. The initial goal includes achieving QE of at least 50% with MWIR spectral wavelength band in the 2.5 to 12 um, and possibly beyond. The SLS detector design will be done in collaboration with Dr. Sarath Gunapla's infrared device group at JPL to ensure that the effort addresses NASA needs. Advanced structure design incorporating barriers will be used to reduce dark current. If successful, a Focal Plane Array may be fabricated during Phase II.

POTENTIAL NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
Completion of this Phase II SBIR will enable Type II SLS technology to serve as a platform for the next generation of high performance and large format infrared FPAs. SLS will be an enabling technology for the exotic and often very specialized infrared imaging NASA needs such as this high sensitivity and high operating temperature sensor for space-based and terrestrial applications. NASA specific programs include the high performance thermal imager for the Europa Jupiter System Mission (EJSM) or the next generation Thermal Infrared Sensor (TIRS) for terrestrial applications such as Landsat satellites.

POTENTIAL NON-NASA COMMERCIAL APPLICATIONS (Limit 1500 characters, approximately 150 words)
With the success of this Phase II SBIR to develop resonant Type II SLS technology, both the military and commercial markets stand to benefit greatly. The SLS technology offers the opportunity to realize very high sensitivity thermal imager operating at higher operating temperature from mid wave to long wavelength, and to very long wavelength infrared based on readily available GaSb substrates. With GaSb material system, very large format FPA will be possible. Currently, 4" diameter substrate is already available. Furthermore, GaSb-based SLS technology can piggy back onto the III-V semiconductor industry for rapid product ramp up. For the military, this opens the door for more vehicles/platforms to be outfitted with these high performance cameras. Commercial business such as environmental or gas sensing can benefit from very competitive eventual cost structure.

TECHNOLOGY TAXONOMY MAPPING (NASA's technology taxonomy has been developed by the SBIR-STTR program to disseminate awareness of proposed and awarded R/R&D in the agency. It is a listing of over 100 technologies, sorted into broad categories, of interest to NASA.)
Detectors (see also Sensors)
Materials & Structures (including Optoelectronics)
Thermal Imaging (see also Testing & Evaluation)

Form Generated on 12-15-11 17:36